Electrical Saftey Tips

safety tips for homeowners

Electricity is part of our everyday lives. We use it from the time we wake up until the time we go to bed. Because it is such a common part of our lives we sometimes forget how powerful and dangerous it can be. While it is always a good idea to call a professional for any kind of electrical repair or upgrade here are a few electrical safety tips that can help to keep you and your family safe.


1. Check that you’re using the correct wattage in all your fixtures and appliances.

Using the right bulbs can prevent electrical problems, so check all lamps, fixtures and appliances to ensure you’re using the correct wattage. If a light fixture has no wattage listed, use 60-watt bulbs or less. For unmarked ceiling fixtures, choose 25-watt bulbs.

Pro tip: LED bulbs consume less power and reduce the risk of fixtures overheating. Learn more about LED light benefits.


2. Watch out for overloaded outlets to protect your home.

Overloading an electrical outlet is a common cause of electrical problems. Check all outlets to ensure they are cool to the touch, have protective faceplates and are in proper working order. According to ESFI, you can follow these electrical outlet safety tips:

  • Do not use extension cords or multi-outlet converters for appliances.
  • Only plug one heat-producing appliance into an outlet at a time.
  • Hot outlets should be checked by qualified electricians.
  • Remember that power strips only add outlets—they do not change the amount of power the outlet receives.
  • Smart plugs can be used to monitor outlet power loads and even shut off appliances should an outlet begin to overheat.
  • Replace or repair damaged electrical cords to keep your home safe.

3. Damaged power cords are a serious residential electrical safety risk.

They are capable of causing both fires and electrocution. All power and extension cords should be checked regularly for signs of fraying and cracking, and they should then be repaired or replaced as needed. Power cords should not be stapled into place or run under rugs and furniture. Cords under rugs pose a tripping hazard and can overheat, while furniture can crush cord insulation and damage wires.

The use of extension cords on a regular basis may mean that you don’t have enough outlets to fit your needs. Have a qualified electrician who understands electrical safety rules install additional outlets in rooms where you often use extension cords. When purchasing a power cord, consider the electrical load it will carry. A cord with a load of 16 AWG can handle up to 1,375 watts. For heavier loads, use a 14 or 12 AWG cord.

Pro tip: AWG stands for “American wire gauge.” The lower the number, the thicker the cord!


4. Keep your used and unused cords tidy and secure to prevent damage.

Electrical safety rules don’t just apply to power cords when they’re in use—cords also need to be stored safely to prevent damage. Keep stored cords away from children and pets (who may chew on or play with the cords). Try to avoid wrapping cords tightly around objects; this can stretch the cord or cause overheating. Never rest a cord on a hot surface in order to prevent damage to the cord’s insulation and wires.


5. Unplug all your unused appliances to reduce potential risks.

One of the simplest electrical safety tips is also one of the easiest to forget: when an appliance is not in use, unplug it. Not only does this save you power by reducing any phantom drain (the amount of energy the device consumes even when not actively in use), but unplugging unused appliances also protects them from overheating or power surges.

It’s often difficult to remember to unplug unused appliances, but the new generation of smart plugs offers a solution, allowing you to set power schedules for each outlet.


6. Keep electrical devices and outlets away from water to prevent shock.

Water and electricity don’t mix well. To follow electrical safety rules, keep electrical equipment dry and away from water prevents damage to appliances and can protect against personal injury and electrocution. When working with electrical appliances, it’s important to have dry hands. Keeping electrical equipment away from plant pots, aquariums, sinks, showers and bathtubs lowers the risk of water and electricity coming into contact.


7. Give your appliances proper space for air circulation to avoid overheating.

Without proper air circulation, electrical equipment can overheat and short out, and can become an electrical fire hazard. Make sure your appliances have proper air circulation and avoid running electrical equipment in enclosed cabinets. For best electrical safety, it’s also important to store flammable objects well away from all appliances and electronics. Pay especially close attention to your gas or electric dryer, as these need to be situated at least a foot from the wall to function safely.


8. Ensure that all your exhaust fans are clean to prevent fire hazards.

Some appliances have exhaust fans, which can get dirty or clogged with debris and make the appliance work harder. This can shorten the life of the appliance and can cause a risk to the home due to overheating, or even cause a buildup of dangerous gases that can lead to an electrical fire hazard. Cleaning exhaust fans regularly helps prevent such hazards.


9. Always follow appliance instructions for improved electrical safety.

“Read the instructions” should top the list of electrical safety tips at home. Understanding how to safely operate appliances improves both the performance of your device and your personal safety. Should any appliance give you even a slight electrical shock, stop using it until a qualified electrician checks it for problems.


10. Be aware of heaters and water heaters to prevent potential accidents.

Combustible items should be kept away from portable heaters and built-in furnaces. For furnace safety, store combustibles far away from any heating appliances. Portable heaters should not be operated close to drapes, and to prevent tipping, they should only ever be placed on a stable surface.

On a related note, do you know what temperature your water heater is set to? High temperature settings eat into your water heater energy usage and can cause burns and unintentional scalding, especially in homes with small children.

While these tips are a great start to help keep you safe the best way to protect your family and your home against the risk of electrical fires or electrocution is to hire a qualified, licensed electrician to perform any electrical work in your home. 


image1

Electrical Coupon

Troubleshoot coupon

Troubleshoot coupon

Troubleshoot coupon

image2

Ceiling Fan COupon

Troubleshoot coupon

Troubleshoot coupon

image3